hacking is not just a crime its a survival trick...
Friday, 5 October 2012
Backtrack Penetration Testing: Scanning
The scanning process can be divided into three steps:
Determining if a system is active.
Port scanning the system.
Scanning the system for vulnerabilities.
Step 1 is the process of determining whether a target system is turned on and capable of communicating or interacting with our machine. This step is the least reliable and we should always continue with steps 2 and 3 regardless of the outcome of this test. Regardless, it is still important to conduct this step and make note of any machines that respond as alive.
Ports provide a way or location for software and networks to communicate with hardware like a computer. A port is a data connection that allows a computer to exchange information with other computers, software, or devices.
Common Ports and their Service
Port Number Service 20 FTP data transfer 21 FTP control 22 SSH 23 Telnet 25 SMTP (e-mail) 53 DNS 80 HTTP 443 HTTPS
Pings and Ping Sweeps
A ping is a special type of network packet called an ICMP packet. Pings work by sending specific types of network traffic, called ICMP Echo Request packets, to a specific interface on a computer or network device. If the device (and the attached network card) that received the ping packet is turned on and not restricted from responding, the receiving machine will respond back to the originating machine with an Echo Reply packet. Aside from telling us that a host is alive and accepting traffic, pings provide other valuable information including the total time it took for the packet to travel to the target and return. Pings also report traffic loss that can be used to gauge the reliability of a network connection.
Ping google.com with the count argument -c 4 to ping 4 times.
The simplest way to run a ping sweep is with a tool called FPing. FPing is built into Backtrack and is run from the terminal. The easiest way to run FPing is to open terminal window and type the following:
fping –a –g 172.16.45.1 172.16.45.254>hosts.txt
The “–a” argument is used to show only the live hosts in the output. This makes our final report much cleaner and easier to read. The “–g” is used to specify the range of IP addresses we want to sweep. You need to enter both the beginning and the ending IP addresses. In this example, we scanned all the IPs from 172.16.45.1 to 172.16.45.254. The “>” character is used to pipe the output to a file, and the hosts.txt is used to specify the name of the file our results will be saved to.
There are a total of 65,536 (0–65,535) ports on every computer. Ports can be either TCP or UDP depending on the service using the port. We scan computers to see what ports are in use or “open”. This gives us a better picture of the purpose of the machine, which gives us a better idea about how to attack the box.
TCP 3-Way Handshake
Before we go on, we first have to know how computers on a network communicate with each other. When two computers want to communicate, they go through a processes known as the 3-way handshake. The first computer A will send a synchronize packet to the other computer B. Then, if computer B is listening (has its port open), it will respond back to A with a synchronize-acknowledgement packet. Finally, computer A will send an acknowledgement packet to computer B, and the two computers will communicate as usual.
Nmap was written by Gordon Lyon and is available for free from www.insecure.org and is built into today’s Backtrack Linux 5.
Recommended Reading: Nmap Network Scanning
It is the official guide to using the nmap scanner. What more can I say? This book will cover nmap much more in depth than this site.
When we conduct a port scan, Nmap will create a packet and send it to each designated port on the computer just like the 3-way handshake. The goal is to determine what kind of a response we get from the target ports.
To use Nmap, open up the terminal and type:
nmap -p- 192.168.56.101
Here I scan a Windows XP machine on my network.
The “-p-” tells nmap to scan all ports on a target machine. The 10.0.2.15 is the local ip of the target machine.
To scan systems for vulnerabilities, we will use a vulnerability scanner. There are several good scanners available, but we will be focusing on Nessus. To install Nessus type:
root@bt:~# apt-get install nessus
Then, to access Nessus via the GUI go to: Applications -> Backtrack -> Vulnerability Assessment -> Vulnerability Scanner -> Nessus -> Nessus Start.